Design & Reuse
179 IP
151
0.0
Voltage Regulator 1V to 0.8V
Noise @ 1MHz offset=12nV/Sqrt(Hz), IDD=640uA...
152
0.0
Voltage regulator 5V->1.5V Low/Ultra-low Power LDO IP Core
A 5V -> 1.5V low power LDO (Low Drop-Out) is a type of voltage regulator designed to provide a stable output voltage of 1.5 volts from a 5-volt input ...
153
0.0
Combo voltage regulator combining a high efficiency DC-DC for operation in normal mode and an ultra-low quiescent uLDO to supply AON domain during sleep mode in GF 22FDX
RAR-iLR-qLR-OV-ref-[1.9-5.5]-[0.5-3.3].04_GF_22_FDX is a voltage regulator in GF 22FDX, combining a linear regulator (iLR) or active mode with an ultr...
154
0.0
Low Dropout (LDO) Capless Regulator
The ODT-LDO-IC-300M-7 is a low dropout (LDO), linear regulator for integration in a SoC. The LDO uses advanced control techniques to achieve excellent...
155
0.0
Low Dropout Voltage regulator
...
156
0.0
Low input voltage high performance LDO regulator in TSMC 22ULL
LDO-T22-1-1.8-0.6-1.05_TSMC_22_ULL is a Low input voltage, high performance LDO linear regulator in TSMC 22ULL with programmable output voltage to sup...
157
0.0
Low Noise, High PSRR Replica Voltage Regulator
The WEALDO18NI12SFN32M22G is a voltage regulator operating from 1.8 V. It provides three output voltages 1.2 V driving output load that sinks specific...
158
0.0
Low Noise, High PSRR, Replica LDO
The WEALDORP18NI12RRSP22M22G is a voltage regulator operating from 1.8 V voltage supply. The WEALDO18NI12SFN12M22G provides one output voltage 1.2 V d...
159
0.0
Low Noise, High PSRR, Replica LDO
The WEALDORP1812NI8SFN12M22G is a low-dropout regulator LDO with voltage supplies 1.8 V and 1.2 V. The WEALDORP1812NI8SFN12M22G gives one output volta...
160
0.0
Low Noise, High PSRR, Replica LDO
The WEALDORP1812NI08SFN22M22G is a voltage regulator operating from 1.8 V and 1.2 V power supplies. The WEALDORP1812NI08SFN22M22G provides two 0.8 V...
161
0.0
Low Noise, High PSRR, Replica LDO
The WEALDORP1812NI08SFN42M22G is a voltage regulator operating from 1.8 V and 1.2 V power supplies. The WEALDORP1812NI08SFN42M22G provides four 0.8...
162
0.0
Low Noise, High PSRR, Replica LDO
The WEALDOLR18NI2SFN42M22G is a voltage regulator operating from 1.8 V. It provides four output voltages 1.2 V driving output load that sinks specific...
163
0.0
Low Noise, High PSRR, Replica LDO
The WEALDOLR18NI2SFN42M22G is a voltage regulator operating from 1.8 V. It provides four output voltages 1.2 V driving output load that sinks specific...
164
0.0
Low Power 30mA 10Ghz BW capless IP Core
A 30mA 10GHz BW capless LDO (Low Drop-Out) is a type of voltage regulator that is designed to provide a stable output voltage with a low voltage drop ...
165
0.0
Low Power 5V - > 1.8V Cap-less LDO IP Core
A 5V -> 1.8V low-power LDO (Low Drop-Out) is a type of voltage regulator designed to provide a stable output voltage of 1.8 volts from a 5-volt input ...
166
0.0
Low Power 5V->2.4V Low noise LDO IP core
A 5V -> 2.4V low power LDO (Low Drop-Out) is a type of voltage regulator designed to provide a stable output voltage of 2.4 volts from a 5-volt input ...
167
0.0
Low Power 5V->3.0V Cap-less LDO IP Core
A 5V -> 3.3V low power LDO (Low Drop-Out) is a type of voltage regulator designed to provide a stable output voltage of 3.3 volts from a 5 volt input ...
168
0.0
Low-leakage LDO supporting up to 3.63 V input voltage in TSMC 22ULL
iLR-Victoria-ref-1.62-3.63-0.6-2.5.03_TSMC_22_ULL is a High-performance LDO regulator in TSMC 22ULL to supply noise-sensitive active domains from inpu...
169
0.0
Low-noise Regulator for VCO 1V to 0.8V
Noise @ 1MHz offset=2.5nV/Sqrt(Hz), IDD=12mA...
170
0.0
Low-quiescent LDO voltage regulator in TSMC 22ULL
LDO-LQ-VR-LS-1.62-3.63-0.6-1.15-A01-D2.5-T22ULL is a Low-quiescent LDO voltage regulator in TSMC 22ULL....
171
0.0
Low-quiescent LDO voltage regulator in TSMC 22ULL 1.8V
LDO-LQ-LS-1.62-5.5-0.6-1.8-A05-D1.8-T22ULL_TSMC_22_ULL1.8 is a Low-quiescent LDO voltage regulator in TSMC 22ULL 1.8V....
172
0.0
Power Management Unit
PMU IP includes following components: Bandgap reference voltage source and reference current sources. Bandgap source forms temperature, power supply a...
173
0.0
Power Management Unit (2.3 - 3.0V output voltage, load current 20mA)
130iHP_PMU_01 is designed to form stabilized voltage with overcurrent indication (bit OVC). The block has configurable output voltage (2.3 / 2.4 / 2.5...
174
0.0
5V- > 3.3V Low/Ultra-low Power LDO IP Core
A 5V -> 3.3V low power LDO (Low Drop-Out) is a type of voltage regulator designed to provide a stable output voltage of 3.3 volts from a 5 volt input ...
175
0.0
5V- >1.1V/0.9V Low/Ultra-low Power LDO IP Core
A 5V -> 1.1V/0.9V low power LDO (Low Drop-Out) is a type of voltage regulator designed to provide a stable output voltage of 0.9 volts from a 5-volt i...
176
0.0
5V->1.2V Low/Ultra-low Power LDO IP Core
A 5V -> 1.2 V low power LDO (Low Drop-Out) is a type of voltage regulator designed to provide a stable output voltage of 1.2 volts from a 5-volt input...
177
0.0
5V->1.5V Cap-less Ultra-low Power LDO IP Core
A 5V -> 1.5V low power LDO (Low Drop-Out) is a type of voltage regulator designed to provide a stable output voltage of 1.5 volts from a 5-volt input ...
178
0.0
5V->2.4V LDO with 50ppm/°C Temperature coefficient IP Core
A 5V -> 2.4V low power LDO (Low Drop-Out) is a type of voltage regulator designed to provide a stable output voltage of 2.4 volts from a 5-volt input ...
179
0.0
5V/4.2V ->1.8V Low/Ultra-low Power LDO IP Core
A 5V/4.2V -> 1.8V low power LDO (Low Drop-Out) is a type of voltage regulator designed to provide a stable output voltage of 1.8 volts from a 5V-volt ...